-
- Question
- When the connection of Gun to the Receiver is done after the Receiver plugged into the PC , but the Receiver is being recognized by the PC Operation System for long time.
- Answer
-
Plug the Receiver to another USB port of PC and try it one more time。
-
- Question
- The Gun is held statically,but the cursor or the look of game changes like turning again and again.
- Answer
-
Keep pressing the R button till the Gun vibrates to complete the Gun Calibration.
If the problem is not resolved yet, please contact the reseller for further assistance.
-
- Question
- Not familiar with the manipulation of Gun to align the sight bead with the target
- Answer
-
Move the gun to obtain the expected look of game then keep pressing the R
button and align the sight bead with the target. After that, please release the R button quickly.For player new to the X-Rover Gun, it might take 10 minutes to master the control skill.
-
- Question
- The Lamp 1 and Lamp 4 in the Gun keep lighting simultaneously and the Gun can not control the game.
- Answer
-
The sensitivity switch contact is not in the right gear position, that is EMPTY
gear position. Turn the switch and ensure the contact in the right gear position when there is aslight click sound.
-
- Question
- In some game, the trigger of Gun dose not function as “Fire” while the button RB/2 dose. How to remap these two buttons?
- Answer
-
Remap these two buttons according to the section in User Manual, Remap
Buttons of section “Smooth Control” Tips.
-
- Question
- When playing game in PC, the game set some seldom-used key which is not available to the X-Rover Gun. How to reset that?
- Answer
-
In the Option of Game, reset this seldom-use Key to the key which is available to
13the Gun.
-
- Question
- When playing the game, the working pattern of Receiver is changed by accident, for example, change from PC pattern to PS3/XBOX , the connection of Gun to the Receiver is lost. How to re-connect the Gun to the Receiver?
- Answer
-
Unplug the Receiver from the console/PC and re-plug into, then make the
connection one more time as per the guidance in User Manual.
-
- Question
- When the Receiver is plugged into the X-BOX 360 console, but the X-Rover Gun can not control the console.
- Answer
-
If the Received is not plugged by the wired X-BOX 360 controller ,the Receiver
has to be unplug from the console and the wired X-BOX 360 controller has to be pluggedinto the Receiver. Then plug the Receiver into the X-BOX 360 console one more time.
-
- Question
- When the Gunpoint deviates from the target or sight bead too much, how to quickly align the gun with the target?
- Answer
-
Keep pressing the R button to “lock” the screen and align the gun with the target
then release R button.
-
- Question
- Some button in Gun is not used in some games. Is it ok?
- Answer
-
If the game dose not get involved into some button of Gun, it is no problem.
-
- Question
- The connection of Gun to the Receiver is not done successfully
- Answer
-
Condition 1:The Lamp 1 in Gun flashes slowly indicating the battery power is low, please
replace the batteries with the new ones.Condition 2:The Working Pattern of Receiver is changed when plugging in PC or Console,such as change from PC pattern to PS3/XBOX pattern by accident, the Receiver has to beunplugged and plugged once again. Then make the connection of Gun to the Receiver onemore time.Condition 3 : When Receiver is plugged into the USB port of PC, the Receiver is notrecognized by Operation System for long time, please change the USB port of PC and try thatone more time.
-
- Question
- When the Gun is not manipulated for some time, the Gun will enter the Sleeping status (Lamp 4 in Gun stops lighting and Lamp 1 in Gun is lighting).How to wake up the Gun?
- Answer
-
Press the MENU button for 2 seconds to wake up the Gun, the Lamp 1 in Gun stop lighting and Lamp 4 is lighting
-
- Question
- After the connection of Gun to Receiver is done successfully, and the buttons in Gun work but the look of game or the cursor is not controlled by Gun.
- Answer
-
The Gun Calibration is not done due to the limited time after power on. Please keep pressing the R button till the Gun vibrates then release R button. Then the Gun Calibration is done.
-
- Question
- The X-Rover Game Gun is not powered on when Power button pressed
- Answer
-
Check the polarity of batteries is right when installed in the battery holder;Make sure the contact of battery holder is securely contacted by the power supply board in the Gun.
Shenzhen Lovin Global Technology Co., Ltd reserves all the rights.
No.406, Bulding 1, Zhuguang Innovation Park, Zhuguang Road, Nanshan District, Shenzhen City, China
Tel:086-0755-83187296 Fax:086-0755-83954872 E-mail:kefu@lovinglobal.com